National Magnetics Group, Inc. National Magnetics Group, Inc.

Home >Products >Soft Ferrite: Extruded

Soft Ferrite: Extruded

The only option for medium to high-volume quantities when length exceeds 2″. Custom lengths available with maximum standard lengths of ~7.5 to 8″. Diameters available from ~0.125 to 1″, tight tolerances available with centerless grinding. Most sizes available and custom tooling is inexpensive. Refer to Effective Permeability of Rods for relationship between material permeability and length-to-diameter ratio. Refer to material tables for available Materials and Notes below for further ordering information. Typically used as antennas (transmit/receive & RFID), transformers or impeders for high-frequency welding.

RODS

p/n
OUTSIDE
DIAMETER

inches (mm)
LENGTH

inches
RX-125-XXXX-XX0.125 (3.2)X.XXX
RX-250-XXXX-XX0.250 (6.4)X.XXX
RX-312-XXXX-XX0.312 (7.9)X.XXX
RX-375-XXXX-XX0.375 (9.5)X.XXX
RX-500-XXXX-XX0.485 (12.3)X.XXX
RX-500-XXXXA-XX0.500 (12.7)X.XXX
RX-625-XXXX-XX0.625 (15.9)X.XXX
RX-875-XXXX-XX0.875 (22.2)X.XXX
RX-1000-XXXX-XX1.000 (25.4)X.XXX

STRIPS

p/n
WIDTH

inches (mm)
THICKNESS

inches (mm)
LENGTH

inches
SX-370-XXXX-XX0.370 (9.4)0.100 (2.5)X.XXX
SX-480-XXXX-XX0.480 (12.2)0.120 (3.1)X.XXX
SX-500-XXXX-XX0.500 (12.7)0.125 (3.2)X.XXX
SX-625-XXXX-XX0.625 (15.9)0.140 (3.6)X.XXX
SX-725-XXXX-XX0.725 (18.4)0.120 (3.1)X.XXX
SX-750-XXXX-XX0.750 (19.1)0.245 (6.2)X.XXX
SX-875-XXXX-XX0.875 (22.2)0.180 (4.6)X.XXX
SX-1000-XXXX-XX1.000 (25.4)0.375 (9.5)X.XXX
SX-1250-XXXX-XX1.250 (31.8)0.250 (6.4)X.XXX


TUBES

p/n
OUTSIDE
DIAMETER

inches (mm)
INSIDE
DIAMETER

inches (mm)

LENGTH

inches
TX-218-XXXX-XX0.218 (5.5)0.063 (1.6)X.XXX
TX-315-XXXX-XX0.315 (8.0)0.157 (4.0)X.XXX
TX-375-XXXX-XX0.375 (9.5)0.125 (3.2)X.XXX
TX-500-XXXX-XX0.485 (12.3)0.125 (3.2)X.XXX
TX-625-XXXX-XX0.625 (15.9)0.150 (3.8)X.XXX
TX-750-XXXX-XX0.750 (19.1)0.150 (3.8)X.XXX
TX-750-XXXXA-XX0.750 (19.0)0.354 (9.0)X.XXX
TX-875-XXXX-XX0.875 (22.2)0.150 (3.8)X.XXX
TX-1000-XXXX-XX1.000 (25.4)0.150 (3.8)X.XXX

RODS-SLOTTED

p/n
OUTSIDE
DIAMETER

inches (mm)
LENGTH

inches (mm)
SLOTS

number
SLOT
WIDTH x DEPTH

inches
RX-236-7874S-XX0.236 (6)7.874 (200)60.045 0.090
RX-315-7874S-XX0.315 (8)7.874 (200)60.035 x 0.088
RX-395-7874S-XX0.395 (10)7.874 (200)60.045 x 0.090
RX-472-7874S-XX0.472 (12)7.874 (200)80.045 x 0.090
RX-551-7874S-XX0.551 (14)7.874 (200)80.043 x 0.112
RX-591-7874S-XX0.591 (15)7.874 (200)80.030 x 0.060
RX-630-7874S-XX0.630 (16)7.874 (200)80.045 x 0.090
RX-748-7874S-XX0.748 (19)7.874 (200)80.036 x 0.202


TUBES-SLOTTED

p/n
OUTSIDE
DIAMETER

inches (mm)
INSIDE
DIAMETER

inches (mm)

LENGTH

inches (mm)

SLOTS

number
SLOT
WIDTH x DEPTH

inches
TX-395-7874S-XX0.395 (10)0.120 (3)7.874 (200)60.045 x 0.090
TX-472-7874S-XX0.472 (12)0.120 (3)7.874 (200)80.045 x 0.090
TX-630-7874S-XX0.630 (16)0.276 (7)7.874 (200)80.045 x 0.090
TX-748-7874S-XX0.748 (19)0.150 (3.8)7.874 (200)80.036 x 0.202

Notes:

  1. Material (-XX): prefix for NiZn (ie.RMX-) or suffix for MnZn (ie. –M20).
  2. Length: (-XXXX-): made to order, insert dimension (ie. RX-500-2500-M20)
  3. Tolerances (dimensional – cross section): ±5%
  4. Tolerances (dimensional – length): ±2%
  5. Tolerances (dimensional – straightness): 0.011/inch (0.050 max)
  6. Tolerances (inductance & Q): ±10% & -20% (grading available)
  7. Grinding: available for tighter tolerances
  8. Slots (impeders): for water cooling (as is ID for tubes), dimensions reference