National Magnetics Group, Inc. National Magnetics Group, Inc.

Home >Products >Soft Ferrite: Machined >Micro-Gapped Toroids
Micro-Gapped Toroids

Micro-Gapped Toroids

Ceramic Magnetics is an industry leader in custom gapped cores.  Our micro-gapped toroids offer an efficient, low loss, high-energy solution for switching power supplies and linear devices with effective permeability ranging from 100 to 400.

Core sizes from 0.156 to 0.520″ outside diameter, 0.090” to 0.300” inside diameter, and as small as 0.020” high are available.  Gapped toroids can reduce size, reduce losses, and are less noisy than other core technologies. They are a cost effective alternative to gapped shapes in transformers or powdered metal cores in output chokes.   Material typically supplied is MN80.

  1. Height (made to order X.XXX): options 0.020 to 0.125 (smaller more cost effective)
  2. Total Gap (made to order X.XXX): options 0.002/0.003/0.004/0.005/0.006/0.008/0.010/0.014
  3. Tolerances (dimensional): ±0.005
  4. Tolerances (magnetic): a) Inductance ±10% (w/ gap <0.003 ±15%) (grading available); b) Inductance with DC Bias: minimum value based on design
  5. Supplied with rounded edges and parylene coating
  6. Other sizes available (recommended OD:ID ratio ≤ 2.5)
P/N082XXXP-MN80
OUTSIDE
DIAMETER

inches
0.156
INSIDE
DIAMETER

inches
0.090
HEIGHT


inches
X.XXX
TOTAL
GAP (S x2)

inches
X.XXX
P/N082XXXP-MN80
OUTSIDE
DIAMETER

inches
0.175
INSIDE
DIAMETER

inches
0.090
HEIGHT


inches
X.XXX
TOTAL
GAP (S x2)

inches
X.XXX
P/N082XXXP-MN80
OUTSIDE
DIAMETER

inches
0.205
INSIDE
DIAMETER

inches
0.095
HEIGHT


inches
X.XXX
TOTAL
GAP (S x2)

inches
X.XXX
P/N082XXXP-MN80
OUTSIDE
DIAMETER

inches
0.255
INSIDE
DIAMETER

inches
0.105
HEIGHT


inches
X.XXX
TOTAL
GAP (S x2)

inches
X.XXX
P/N082XXXP-MN80
OUTSIDE
DIAMETER

inches
0.375
INSIDE
DIAMETER

inches
0.187
HEIGHT


inches
X.XXX
TOTAL
GAP (S x2)

inches
X.XXX
P/N082XXXP-MN80
OUTSIDE
DIAMETER

inches
0.400
INSIDE
DIAMETER

inches
0.200
HEIGHT


inches
X.XXX
TOTAL
GAP (S x2)

inches
X.XXX
P/N082XXXP-MN80
OUTSIDE
DIAMETER

inches
0.520
INSIDE
DIAMETER

inches
0.300
HEIGHT


inches
X.XXX
TOTAL
GAP (S x2)

inches
X.XXX
P/NOUTSIDE
DIAMETER

inches
INSIDE
DIAMETER

inches
HEIGHT


inches
TOTAL
GAP (S x2)

inches
082XXXP-MN800.1560.090X.XXXX.XXX
082XXXP-MN800.1750.090X.XXXX.XXX
082XXXP-MN800.2050.095X.XXXX.XXX
082XXXP-MN800.2550.105X.XXXX.XXX
082XXXP-MN800.3750.187X.XXXX.XXX
082XXXP-MN800.4000.200X.XXXX.XXX
082XXXP-MN800.5200.300X.XXXX.XXX